Description

I. Product overview
Model: DS200ACNAG1ADD
Manufacturer: General Electric (GE)
Type: ARCNET communication card
Application scenario: Mark V gas/steam turbine management system
Second, technical characteristics
Communication function:
The DS200ACNAG1ADD provides a connection point for ARCNET LAN communication within the Mark V system, enabling the smooth transmission of signals between the master processor board (LDCC) and the ARCNET board, which eventually reach the turbine control operator interface and return.
The board signal is transmitted through coaxial cable to ensure the stability and reliability of communication.
Hardware design:
The DS200ACNAG1ADD is a small circuit board with fewer components, consisting of four metal-film resistors (R1 to R4), three capacitors (C1 to C3), and a diode.
There are also two factory drilled openings on the board, labeled GND1/GND2, for inserting metal washers.
The board is also equipped with two relays, each with a relay diagram on the top surface for visual representation of relay logic.
Interface configuration:
The DS200ACNAG1ADD has three communication devices, including a vertical pin terminal connector with six pins located right in the center of the board.
In addition, there are two BNC plugs (right angles, female heads), located on the top edge of the board, to accept the LAN coaxial cable.
3. Application scenarios and functions
The DS200ACNAG1ADD is primarily used in Mark V series gas turbine management systems as a key control and communication component.
It supports non-redundant, dual-redundant, and triple-redundant configurations, providing a high degree of flexibility and reliability.
By communicating with the main processor and I/O module, the DS200ACNAG1ADD ensures stable operation of the turbine system and provides diagnostic and maintenance information when necessary.

The article is from the official website of Zhejiang Yiwu Beixun Automation Technology Co., Ltd. Please attach the following link for reprinting: https://www.ywrobots.com