FBM222-P0926TL input and output module, also called the control module, can output signals when there are control requirements, or provide a switching signal to make the controlled equipment act. At the same time, it can receive feedback signals from the equipment to report to the host. It is a fire hazard An important component in the alarm linkage system. Input and output modules on the market can provide a pair of passive normally open/normally closed contacts to control the controlled equipment. Some manufacturers' modules can be set to active output through parameter settings. For example, Gulf's GST-LD-8301 input/output module is a bus control interface that can be used to control dual-action equipment such as two-step fire shutter doors, water pumps, and smoke exhaust fans. In addition, there are dual input and output modules, multiple input and output modules, and so on. The output module is connected to the loop bus of the controller and can be installed near the controlled equipment or in the floor terminal module box. Using electronic coding, coding can be done on-site. The output control logic of the output module can be programmed according to the engineering situation. The main features of the FBM222-P0926TL input and output module include: Input signal: The module can accept different types of input signals, such as analog signals (such as voltage or current) or digital signals (such as switching signals). Output signal: The module can provide one or more output channels for controlling external devices, such as motors, valves, transmissions, etc.