Description

Bentley extension cables.

1. The Bentley extension cable is an intermediate component connecting the probe to the preamplifier and should be installed so that it is not susceptible to damage during use and that signal transmission is normal and reliable. The exterior of the Bentley extension cable is sealed with PTFE and the internal structure of the probe is insulated.However, the connectors of the extension cable and the probe cable are connected to the signal “ground” and the metal surface of the connectors is exposed. In order to avoid contact between the joints and the enclosure and to enhance their protection, the extension cable connector and the probe high-frequency connector are hand-tightened during installation, and then the sleeve is placed over the joints, thus providing insulation and protection. Bentley extension cable has two kinds, one is with armour, the other is not with armour two kinds, pipe laying with extension cable without armour. Can not arbitrarily cut too long cable or lengthen the cable, if there is too long cable, you need to disc into a circle with a diameter of not less than 50mm with straps tightened with a pressure plate to fix it. In the selection, it should be ensured that the sum of the length of the extension cable plus the length of the probe cable is greater than the distance from the probe installation to the preamplifier installation, and usually the preamplifier is centrally installed on the same side of the machine.
2.